PHIL LESH AND FRIENDS
November 22, 2005
NJPAC - Newark, NJ
SBD+AUD Matrix in DTS 16/44  
 
Sources:
SBD: DSBD (Mixed and Mastered by Wiz)
AUD: Source: Schoeps mk4 (din, 6'stand, fob, roc)> kc5> cmc6> Lunatec V3 (24/96)> 
     Transfer: PDAudio-CF> iPaq 3835 (Live2496, Addonics Pocket ExDrive); Wave Lab 5 
	(fades, patch s1t01^ & s2t01^^), CDWave (tracks)
	Recorded by Craig Taraszki (ctaraszki@hotmail.com) - Thanks db for the mics!

Matrix: DSBD and AUD tracks mixed in Sony Vegas by Stitt (oaxacavine@yahoo.com)
DTS:
	Track 1 = DSBD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Forward
	Track 2 = AUD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Backward
	Track 3 = DSBD cutoff at 116kh for LFE (same levels as Tracks 1 & 2)
	Surround Master = -2.2 across the board
	Mono Channels output at 16/44
	DTS encoded with Surcode DVD DTS

SET 1: 
Disc 1
1) Jam> Scarlet Begonias>
2) Althea
3) Long Black Veil
4) Tennessee Jed
5) Fennario (Peggy-O)
6) Sugaree
7) Cosmic Charlie

SET 2: 
Disc 2
1) Just Another Whistle Stop> 
2) Jam> 
3) Big Railroad Blues 
4) ^Feedback> ^Caution (Do Not Stop On Tracks)> ^Feedback>
5) *Cowboy Movie> Mountain Song Chorus> Jam>
6) Gimme Shelter> 
7) Cryptical Envelopment> The Other One>

Disc 3
1) Truckin'>
2) I Know You Rider 
3) Donor Rap/Band Intros 
4) E: Do Right Woman 

^Phil plays Big Brown, *1st time played

Phil Lesh, Chris Robinson (vocals, guitar)
Larry Campbell (guitar, mando,violin, ps, etc)
John Molo (drums), Mookie Siegel (keys)
Barry Sless (guitar+pedalsteel)

More On DTS:

Today's audio standards are moving towards multi-channel 
sound, like DTS and Dolby Digital.  While the Audio-CD 
standard (Red Book) hasn't changed to accommodate these 
new sound formats, it is still possible to go around the 
specification and to put a 5.1 surround recording on a 
regular Audio-CD.  To play a DTS-Audio-CD you must connect 
your DVD/CD player via a digital cable (optical or coaxial) 
to your DTS Dolby-Digital receiver. It is not 100% sure 
that your receiver will recognize a DTS-Audio CD, so the 
first time you're trying to playback a DTS-Audio-CD you 
must do a test to determine if it can. Begin with the 
volume very low, start the disc and rise the volume 
gradually. NEVER listen to a DTS-Audio-CD through the 
analogue audio outputs of your CD/DVD player.


Burning Instructions
Burn them the absolute same way as you would burn any 
normal Audio-CD from .flac files.

Make sure you mark this as a DTS CD disc that's not for 
playback in an Audio-CD player, as the digital noise will
be at full volume level and speaker damage could result.

There is a DTS decoder for Winamp at
http://files.digital-digest.com/downloads/files/playback/in_dts.zip
I've found it works best when using the DirectSound output

